ProMapRanker
🛠 Scheduled maintenance: We're performing scheduled maintenance on our scanning engine. New scans, audits and lookups are temporarily paused and will resume in approximately 12 hours. Your existing reports and dashboards remain fully available.
best structural design software

Best Structural Design Software in 2026

Best Structural Design Software in 2026
ETABS logo
Our #1ETABS

Multi storey buildings · Pricing starts at: See website

Open csiamerica.com
STAAD.Pro logo
Close secondSTAAD.Pro
Visit
SAP2000 logo
Also solidSAP2000
Visit

Key takeaways

  • ETABS suits multi storey buildings, while STAAD.Pro suits general frames, industrial work, and mixed materials.
  • SAP2000 suits unusual shapes and bridges, and Tekla Structural Designer suits concrete and steel buildings with a BIM link.
  • RFEM 6 suits complex geometry and plate work, while SkyCiv suits small teams that want cloud access and clear pricing.
  • Most enterprise tools are quote based, so budget for licences, training, and code libraries, not only the base licence.
  • Autodesk Robot Structural Analysis stopped renewals in May 2026, so do not start new long term projects on it.

Quick comparison

PickGreat forPricing starts atFree tier
ETABSMulti storey buildingsSee websiteNoVisit
STAAD.ProGeneral frames and industrial structuresSee websiteNoVisit
SAP2000General structures and bridgesSee websiteNoVisit
Tekla Structural DesignerConcrete and steel buildingsSee websiteNoVisit
RFEM 6Complex geometry and platesSee websiteNoVisit
SkyCiv Structural 3DCloud based analysis for small teams$79 per monthYesVisit
IDEA StatiCaSteel connectionsSee websiteNoVisit
midas CivilBridge and civil structuresSee websiteNoVisit

The best structural design software

Structural design software models loads, checks members, and produces design output that an engineer can review and sign. We kept tools that are live in October 2026, cover analysis and design, and are used on real projects, not drafting tools alone.

ETABS logo
#1

ETABS

Great for: Multi storey buildings

Open csiamerica.com
Pricing starts atSee website
Free tierNo

ETABS, from Computers and Structures, thinks in stories, grids, and diaphragms, which matches how multi storey buildings behave. Floors act as diaphragms, loads move down story by story, and design output follows that structure. That focus makes building models faster to build and easier to check.

The limit is project type. For a bridge, a tank, or an industrial frame with unusual geometry, a general solver may fit better. ETABS is also an enterprise purchase, so ask for licence terms, code coverage for your region, and training costs before you compare prices.

Why it made the list
  • Building focused modelling by storey and grid
  • Seismic and wind tools
  • Strong concrete and steel design
Keep in mind
  • Quote based pricing
  • Building focus makes it less suited to some bridge or plant work
STAAD.Pro logo
#2

STAAD.Pro

Great for: General frames and industrial structures

Open bentley.com
Pricing starts atSee website
Free tierNo
STAAD.Pro website
bentley.com homepage

STAAD.Pro is the generalist on this list. It handles steel, concrete, and timber frames, industrial structures, pipe racks, and mixed material projects, with many international codes. The 2026 release added checks for newer seismic and composite rules, plus scripting links for automation.

That breadth is also its weakness. A general tool will not model a tall building as quickly as ETABS, and it will not detail a building like a BIM tool. Choose STAAD.Pro when your work varies from job to job, and you need one solver that can cover most of it.

Why it made the list
  • Broad material and code coverage
  • General purpose modelling
  • Bentley integration
Keep in mind
  • Quote based pricing
  • Interface can feel dated next to newer cloud tools
SAP2000 logo
#3

SAP2000

Great for: General structures and bridges

Open csiamerica.com
Pricing starts atSee website
Free tierNo

SAP2000 is the other general solver from Computers and Structures, and it suits odd shapes: water tanks, towers, footbridges, canopies, and bridges. It offers a wide range of analysis types, so an engineer can model a structure that does not fit a building template.

For routine multi storey buildings, ETABS will usually be faster. For a one off structure with unusual geometry, SAP2000 earns its place. Confirm code coverage and licence terms, since CSI products are sold by licence type and region.

Why it made the list
  • Flexible general solver
  • Bridge and special shape modelling
  • Broad analysis types
Keep in mind
  • Quote based pricing
  • Learning curve for new users
Tekla Structural Designer logo
#4

Tekla Structural Designer

Great for: Concrete and steel buildings

Open tekla.com
Pricing starts atSee website
Free tierNo

Tekla Structural Designer is built for concrete and steel buildings, with a direct link to Tekla Structures for detailing. That link matters: analysis, design, and detailing stay closer together, which cuts rework when a member size changes. It suits offices that already work in a BIM workflow.

It is not a general bridge or plant tool. If your work is mostly buildings, and your team uses Tekla detailing, this is a strong fit. If your work varies widely, pair it with a general solver rather than forcing every job into it.

Why it made the list
  • Building design with BIM link to Tekla Structures
  • Concrete and steel focus
  • Clear design output
Keep in mind
  • Quote based pricing
  • Building focus limits non building work
RFEM 6 logo
#5

RFEM 6

Great for: Complex geometry and plates

Open dlubal.com
Pricing starts atSee website
Free tierNo

RFEM 6, from Dlubal, handles plates, shells, solids, and complex geometry that frame tools handle poorly. It suits projects where surface behaviour, curved forms, or detailed finite element work matters, and it covers Eurocode design in depth.

The cost is complexity. A full finite element model needs careful meshing, load definition, and result checking, and that takes time and skill. For simple frames, RSTAB, the frame only version from the same vendor, may be quicker and cheaper to run.

Why it made the list
  • Strong finite element modelling for plates and shells
  • Eurocode design
  • Complex geometry support
Keep in mind
  • Quote based pricing
  • Frame only users may prefer the lighter RSTAB version
SkyCiv Structural 3D logo
#6

SkyCiv Structural 3D

Great for: Cloud based analysis for small teams

Open skyciv.com
Pricing starts at$79 per month
Free tierYes

SkyCiv Structural 3D runs in a browser, so a small team can model, analyse, and design without a heavy desktop install. It covers linear and P-Delta analysis, buckling, plates, and design checks for steel, wood, connections, and foundations across many codes. Published pricing starts at $79 per month per user, with a free version available.

It is not a replacement for an enterprise solver on a very large or complex project. It is a good fit for small firms, freelancers, and teams that need clear monthly pricing and fast setup. Check which design codes and modules are in your plan before you rely on it for a regulated job.

Why it made the list
  • Cloud access from any browser
  • Published pricing
  • Free version and trial
Keep in mind
  • Less depth than enterprise solvers for very large projects
  • Subscription cost rises with modules
IDEA StatiCa logo
#7

IDEA StatiCa

Great for: Steel connections

Open ideastatica.com
Pricing starts atSee website
Free tierNo

IDEA StatiCa solves a job that general solvers handle poorly: steel connections. It models joints in detail, checks plates, bolts, and welds against code, and produces output that can be reviewed and filed. Many offices use it alongside ETABS, STAAD.Pro, or Tekla, not instead of them.

Do not buy it as a sole structural tool. Its value appears when connection design is a regular bottleneck, or when a project needs detailed joint checks that a frame model cannot give. Confirm which analysis tools it links to, and which codes are covered for your region.

Why it made the list
  • Detailed steel connection design
  • Code based checks
  • Links to major analysis tools
Keep in mind
  • Connection focus, not a full building solver
  • Quote based pricing
midas Civil logo
#8

midas Civil

Great for: Bridge and civil structures

Open midasoft.com
Pricing starts atSee website
Free tierNo

midas Civil is built for bridges and civil structures, including construction stage analysis, moving loads, and time dependent effects. That focus suits bridge engineers who need stage by stage behaviour, not only a final state check.

For routine buildings, a building tool will be faster. For bridges, midas Civil is a specialist choice that matches the workflow, from modelling to construction stages to design checks. Ask for licence terms and code coverage, since bridge codes vary widely by country.

Why it made the list
  • Bridge focused modelling and construction stages
  • Civil structure tools
  • Broad code coverage
Keep in mind
  • Quote based pricing
  • Bridge focus makes it less suited to routine building work

How we picked these

We compared official product pages, vendor documentation, and current project use, and we kept only tools that are live in October 2026 and that cover analysis and design. We excluded Autodesk Robot Structural Analysis, since Autodesk stopped renewals from 7 May 2026. Prices are shown as published, or as See website where pricing is quote based. We did not claim hands on testing, and software output still needs review by a qualified engineer.

What to check before you buy

Match the tool to the project type first, then to price. A building tool, a bridge tool, and a connection tool solve different problems, and buying the wrong type costs more in time than any licence saving. Check code coverage for your country and state, since a tool that lacks your code will need manual checks.

Codes, licences, and workflow

Confirm which design codes are included, how licences are counted, and how models move to detailing and documentation. A tool that cannot export cleanly to your BIM or drafting workflow will create manual rework. Ask about training, support, and update terms, since enterprise licences often bundle those costs.

Trial with a real job

Run a past job through a trial, and compare member sizes, load paths, and output reports with your known result. Watch for modelling steps that take too long, reports that are hard to check, and code checks that are missing. That test tells you more than a feature list.

Frequently asked questions

What are the best structural design tools for buildings?

For multi storey buildings, ETABS and Tekla Structural Designer lead, with STAAD.Pro as a strong general option. The best choice depends on material, height, seismic needs, and whether your office uses BIM detailing.

What is the top rated structural design software for general work?

There is no single winner for all work. STAAD.Pro and SAP2000 cover the widest range of general structures, while RFEM 6 suits complex geometry and SkyCiv suits small teams that want cloud access.

Is SkyCiv good enough for professional work?

Yes, for many small to midsize jobs, with published pricing and a free version to test. For very large or complex projects, enterprise solvers may offer deeper analysis and code coverage, so test SkyCiv on a real job first.

Can I still buy Autodesk Robot Structural Analysis?

No, for new long term work. Autodesk stopped renewals from 7 May 2026 as part of a move to its Forma Industry Cloud. Offices still on Robot should plan a migration to another solver.

How much does structural design software cost?

It varies widely. SkyCiv publishes $79 per month per user, while ETABS, STAAD.Pro, Tekla, RFEM 6, and most enterprise tools are quote based. Budget for licences, training, and code libraries, not only the first year licence.

Sources

  1. https://www.csiamerica.com
  2. https://www.bentley.com
  3. https://www.tekla.com
  4. https://www.dlubal.com
  5. https://skyciv.com
  6. https://www.ideastatica.com
  7. https://www.midasoft.com

See where you really rank - block by block

ProMapRanker scans Google Maps across a grid of your service area. Simple monthly plans from $19, white-label on every plan.

Start free

Keep reading