ProMapRanker
🛠 Scheduled maintenance: We're performing scheduled maintenance on our scanning engine. New scans, audits and lookups are temporarily paused and will resume in approximately 12 hours. Your existing reports and dashboards remain fully available.
best track separation software

Track Separation Software: Best Picks of 2026

Track Separation Software: Best Picks of 2026
Steinberg SpectraLayers logo
Our #1Steinberg SpectraLayers

Spectral editing and in-depth stem repair · Pricing starts at: See website

Open steinberg.net
Hit'n'Mix RipX logo
Close secondHit'n'Mix RipX
Visit
Spleeter logo
Also solidSpleeter
Visit

Direct answer

Steinberg SpectraLayers comes first here, mainly for Spectral editing and detailed stem repair. Listed starting prices: Spleeter from $4 per user per month and LALAL.AI from $7.5 a month. Look at Hit'n'Mix RipX for deep stem editing inside an AI DAW, and at Spleeter for code-based separation with pretrained models. Prices, free plans and limits for all 5 tools follow.

ProMapRanker compared 5 tools for track separation software. The goal is a practical shortlist: published prices, free plan facts, best-fit use cases and honest limits for every entry.

Key takeaways

  • Steinberg SpectraLayers is the opening pick, best for Spectral editing and in-depth stem repair.
  • Starting prices begin at $4 per user per month with Spleeter.
  • A fair warning about Moises: practice focus may not suit post-production.
  • LALAL.AI fits quick AI vocal and instrumental isolation.
  • Spleeter, Moises, LALAL.AI: these are the 3 tools out of 5 that offer a free plan.

Quick comparison

PickGreat forPricing starts atFree tier
Steinberg SpectraLayersSpectral editing and in-depth stem repairSee websiteNot statedVisit
Hit'n'Mix RipXDeep stem editing inside an AI DAWSee websiteFree trialVisit
SpleeterCode-based separation with pretrained models$4 per user per monthYesVisit
MoisesMusicians practicing with separated stemsSee websiteYesVisit
LALAL.AIQuick AI vocal and instrumental isolation$7.5 a monthYesVisit

Tool-by-tool breakdown

Steinberg SpectraLayers logo
#1

Steinberg SpectraLayers

Great for: Spectral editing and in-depth stem repair

Open steinberg.net
Pricing starts atSee website
Free tierNot stated
Websitesteinberg.net
Steinberg SpectraLayers website screenshot
steinberg.net homepage

Choose Steinberg SpectraLayers for Spectral editing and in-depth stem repair. It fits post-production engineers, sound designers, and restoration specialists who require to isolate or remove specific sounds with precision.

This comparison lists no price for Steinberg SpectraLayers; ask the vendor. Free options: Not stated.

Watch-outs: Overkill for fast two-stem splits.

Why it made the list
  • Links up with professional workflows
  • Precise selection and repair tools
Keep in mind
  • Steeper ramp-up time
Hit'n'Mix RipX logo
#2

Hit'n'Mix RipX

Great for: Deep stem editing inside an AI DAW

Open hitnmix.com
Pricing starts atSee website
Free tierFree trial
Websitehitnmix.com

Hit'n'Mix RipX is designed for deep stem editing inside an AI DAW. RipX hands in-depth control over audio once stems are created.

More specifically, users who only need a fast vocal removal may find it more than necessary. Hit'n'Mix RipX does not show a starting price in this comparison, so check the vendor site for current pricing. Free options: Free trial.

Limits to weigh: More complicated than straightforward web tools.

Why it made the list
  • DAW-style control over audio
  • Clean vocal extraction
Keep in mind
  • Concentrated on editing instead of fast splits
Spleeter logo
#3

Spleeter

Great for: Code-based separation with pretrained models

Open github.com
Pricing starts at$4 per user per month
Free tierYes
Websitegithub.com

For code-based separation with pretrained models, Spleeter is a natural candidate. Spleeter is a source separation library from Deezer that bundles pretrained models.

Spleeter has no refined app interface, so setup and command-line use are part of the process. Also, Spleeter is the right fit when reproducibility, automation, or integration into software matters more than convenience. Spleeter starts at: $4 per user per month. Spleeter has a free plan.

Trade-offs to know: No graphical interface.

Why it made the list
  • Pretrained models included
  • Scriptable and reproducible
Keep in mind
  • Needs setup and coding
Moises logo
#4

Moises

Great for: Musicians practicing with separated stems

Open moises.ai
Pricing starts atSee website
Free tierYes
Websitemoises.ai

Moises is designed for musicians practicing with separated stems. Moises is described as the musician's app for practicing music, with vocal removal, instrument separation, mastering, and remixing powered by AI. Separation quality relies on the source recording.

In daily use, Moises leans toward practice and remix instead of surgical restoration, so engineers needing precise spectral edits may want a dedicated editor. The app merges stem separation with tools targeted at daily practice and rehearsal. Moises shows no starting price here, so confirm the cost on the vendor site. You can start on Moises without paying.

The main drawbacks: Practice focus may not suit post-production.

Why it made the list
  • Practice-oriented features
  • Mastering and remix tools included
Keep in mind
  • Automatic results need review
LALAL.AI logo
#5

LALAL.AI

Great for: Quick AI vocal and instrumental isolation

Open lalal.ai
Pricing starts at$7.5 a month
Free tierYes
Websitelalal.ai
LALAL.AI website screenshot
lalal.ai homepage

LALAL.AI is aimed squarely at quick AI vocal and instrumental isolation. LALAL.AI is an AI vocal remover and instrumental isolator built around a straightforward upload-and-separate workflow.

Trade-offs to know: Best results vary by source material.

It suits songwriters, DJs, and content creators who require clean stems quickly without learning a full DAW. On cost, LALAL.AI starts like this: $7.5 per month. LALAL.AI has a free plan.

Why it made the list
  • Fast turnaround for single tracks
  • Deals with vocals and several instruments
Keep in mind
  • Less manual control over separation

How the list was put together

For each of the 5 tools we noted price, free plan or trial, fit for track separation software and the main limit, using vendor pages and documentation. Prices and plan limits come from vendor pages and can change, so confirm them on the vendor site before you buy. Tools are placed by general fit for track separation software, with price clarity and free access as tie-breakers. A different team can reasonably rank them differently.

What to check before you buy

  • Confirm the entry price on the vendor page. For Steinberg SpectraLayers, Hit'n'Mix RipX and Moises that means a quote rather than a fixed price.
  • Check what the free option really includes: Spleeter, Moises and LALAL.AI offer a free plan, and usage caps differ.
  • Use real work to test the free trial from Hit'n'Mix RipX, rather than a demo project.
  • Read the limits listed for Steinberg SpectraLayers first: steeper ramp-up time.
  • A short pilot of LALAL.AI with your real workflow tells you more than a feature table.
  • Check the integration list for Hit'n'Mix RipX against the tools you run today, and note which ones need a higher plan.

Frequently asked questions

Do I need a DAW to use stem separation tools?

Web-based services like LALAL.AI and apps like Moises can separate stems without a full DAW. Tools for example RipX and SpectraLayers blend separation with editing environments.

Do these tools publish their prices?

Not all of them. Steinberg SpectraLayers, Hit'n'Mix RipX and Moises publish no starting price, so expect a quote request for those. The rest, Spleeter included, show a starting price, though seats and billing terms still change the final cost.

How are the tools for track separation software ordered?

Steinberg SpectraLayers sits first and LALAL.AI last because the order follows typical fit for track separation software, then price clarity and free access. It is a judgement call, so read each profile for fit and limits.

What is track separation software used for?

Track separation software isolates vocals and instruments from a mixed recording. More specifically, musicians use it for practice and remixing, whereas editors use it for restoration and post-production.

Can I try these options before paying?

Often, yes. Spleeter, Moises and LALAL.AI have a free plan and Hit'n'Mix RipX offers a free trial. Use your own data and a real task during the test, and check what the free tier or trial limits before you rely on it.

Is Steinberg SpectraLayers the right pick for everyone comparing track separation software?

No single tool suits every team. Steinberg SpectraLayers comes first because it fits Spectral editing and detailed stem repair, while Hit'n'Mix RipX suits deep stem editing inside an AI DAW and Spleeter suits code-based separation with pretrained models. Match the tool to your own size, budget and workflow before deciding.

Sources

  1. Steinberg SpectraLayers: steinberg.net/spectralayers
  2. Hit'n'Mix RipX: hitnmix.com
  3. Spleeter: github.com/deezer/spleeter
  4. Moises: moises.ai
  5. LALAL.AI: lalal.ai

See where you really rank - block by block

ProMapRanker scans Google Maps across a grid of your service area. Simple monthly plans from $19, white-label on every plan.

Start free

Browse all guides

More in AI Tools · All guides A to Z by date · Latest guides