ProMapRanker
🛠 Scheduled maintenance: We're performing scheduled maintenance on our scanning engine. New scans, audits and lookups are temporarily paused and will resume in approximately 12 hours. Your existing reports and dashboards remain fully available.
best network automation tools

Best Network Automation Tools in 2026

Best Network Automation Tools in 2026
Red Hat Ansible Automation Platform logo
Our #1Red Hat Ansible Automation Platform

Multi-vendor automation · Pricing starts at: See website

Open redhat.com
SolarWinds Network Configuration Manager logo
Close secondSolarWinds Network Configuration Manager
Visit
Cisco Catalyst Center logo
Also solidCisco Catalyst Center
Visit

Key takeaways

  • Network automation tools cut manual configuration work, reduce errors, and make changes repeatable across many devices.
  • Ansible suits multi-vendor automation with code, while SolarWinds and ManageEngine suit teams that want config backup and compliance checks.
  • Cisco Catalyst Center and Juniper Apstra suit single-vendor or data centre estates where intent-based control pays off.
  • Open source tools such as Nautobot cost nothing in licences but need engineering time to deploy and maintain.
  • Our pick for most teams is Red Hat Ansible Automation Platform for its breadth, community content, and multi-vendor reach.

Quick comparison

PickGreat forPricing starts atFree tier
Red Hat Ansible Automation PlatformMulti-vendor automationSee websiteFree trialVisit
SolarWinds Network Configuration ManagerConfig backup and complianceSee websiteFree trialVisit
Cisco Catalyst CenterCisco estate automationSee websiteNoVisit
ManageEngine Network Configuration ManagerBudget config management$595 per yearFree trialVisit
NetBrainNetwork mapping and troubleshootingSee websiteNoVisit
ItentialLow-code orchestrationSee websiteNoVisit
GluwareLarge multi-vendor orchestrationSee websiteNoVisit
Juniper ApstraIntent-based data centre controlSee websiteNoVisit
NautobotOpen source source of truthFreeYesVisit

The best network automation tools

We compared tools that automate device configuration, enforce policy, orchestrate changes, and give teams a clear view of the network. The nine below cover code-based, low-code, vendor-specific, and open source approaches.

Red Hat Ansible Automation Platform logo
#1

Red Hat Ansible Automation Platform

Great for: Multi-vendor automation

Open redhat.com
Pricing starts atSee website
Free tierFree trial
Red Hat Ansible Automation Platform website
redhat.com homepage

Ansible automates network devices, servers, and cloud resources from playbooks written in a readable format, without installing agents on managed devices. Network teams can push configuration, gather facts, check compliance, and roll back changes using the same tool across Cisco, Juniper, Arista, and other vendors. The open source Ansible core is free, while the Red Hat platform adds a controller, automation hub, analytics, and support for production use.

The learning curve is real. A team that only runs ad hoc scripts will not gain the full benefit until it adopts version control, testing, and shared roles. Enterprise pricing is also quote-based, so small teams should compare the free core against the paid platform. For teams that want one automation language across the whole estate, Ansible is our pick.

Why it made the list
  • Agentless automation across vendors
  • Large library of community and certified content
  • Central control with roles and scheduling
Keep in mind
  • Quote-based enterprise pricing
  • Teams need automation skills to build playbooks well
SolarWinds Network Configuration Manager logo
#2

SolarWinds Network Configuration Manager

Great for: Config backup and compliance

Open solarwinds.com
Pricing starts atSee website
Free tierFree trial

SolarWinds Network Configuration Manager focuses on the daily job of keeping device configurations safe and compliant. It backs up configs on a schedule, alerts on unauthorised changes, and lets engineers compare running and saved configs side by side. Policy checks help teams prove that devices meet baseline standards, and bulk change tools cut the time needed for routine updates across many switches and routers.

SolarWinds fits teams that already use SolarWinds monitoring, because config data sits alongside performance data. Teams that want full intent-based orchestration or code-driven automation may find it narrower than Ansible or Itential. For operations teams whose first priority is backup, visibility, and compliance, it is a dependable choice.

Why it made the list
  • Automated config backup and change alerts
  • Compliance policy checks
  • Inventory and diff views for many vendors
Keep in mind
  • Pricing is not published as a simple list price
  • Windows-based deployment suits some estates better than others
Cisco Catalyst Center logo
#3

Cisco Catalyst Center

Great for: Cisco estate automation

Open cisco.com
Pricing starts atSee website
Free tierNo
Cisco Catalyst Center app screenshots
App Store screenshots

Cisco Catalyst Center, formerly Cisco DNA Center, manages a Cisco network from a central console. It automates device provisioning, applies intent-based policies for users and devices, and provides assurance views that link performance issues to specific clients or sites. Software image management and configuration templates reduce manual work during upgrades and site rollouts. For a Cisco-standardised estate, that depth is hard to match with a generic tool.

The catch is vendor scope. Teams with a mixed estate will still need another tool for non-Cisco devices, and licensing is tied to Cisco hardware and subscription tiers. Implementation also needs planning around network design and policy models. For Cisco-heavy enterprises, Catalyst Center is the natural automation hub.

Why it made the list
  • Deep integration with Cisco switches, routers, and wireless
  • Intent-based policy and assurance
  • Central device lifecycle management
Keep in mind
  • Value drops sharply outside Cisco estates
  • Enterprise pricing is quote-based
ManageEngine Network Configuration Manager logo
#4

ManageEngine Network Configuration Manager

Great for: Budget config management

Open manageengine.com
Pricing starts at$595 per year
Free tierFree trial

ManageEngine Network Configuration Manager gives smaller teams commercial config management without an enterprise price tag. It backs up configurations, tracks changes, checks compliance against policies, and flags firmware vulnerabilities. Role-based access and change approval help teams control who can push a change and when. That mix covers the core needs of many small and mid-sized networks at a price that is easy to justify.

Larger teams may want deeper orchestration, richer analytics, or a more modern workflow, and ManageEngine is less strong there. Support and documentation are solid, but the product is best judged as a config manager, not a full orchestration platform. For budget-conscious teams, it is the value pick in this list.

Why it made the list
  • Low starting price for commercial config management
  • Backup, change, and compliance features
  • Firmware vulnerability checks
Keep in mind
  • Interface feels dated next to newer rivals
  • Advanced orchestration is limited compared with low-code platforms
NetBrain logo
#5

NetBrain

Great for: Network mapping and troubleshooting

Open netbraintech.com
Pricing starts atSee website
Free tierNo

NetBrain builds live maps of the network from device configurations and state, then uses those maps for troubleshooting and change planning. Engineers can trace a path between endpoints, see device details in context, and run automated checks without manually drawing diagrams. Runbooks turn repeatable diagnostic steps into guided workflows, which helps less experienced engineers resolve issues faster and more consistently.

NetBrain is not primarily a config push tool, so teams should pair it with a config manager or automation platform where needed. Pricing is quote-based, and the product suits larger estates where visibility is the bottleneck. For teams that lose time to unclear topology and slow troubleshooting, NetBrain is a strong addition.

Why it made the list
  • Dynamic maps built from live device data
  • Automated troubleshooting paths
  • Runbook automation for common incidents
Keep in mind
  • Quote-based pricing
  • Mapping value depends on keeping discovery current
Itential logo
#6

Itential

Great for: Low-code orchestration

Open itential.com
Pricing starts atSee website
Free tierNo

Itential lets network and platform teams build automation workflows with a low-code canvas, while still allowing code where needed. Workflows can span on-prem devices, cloud networks, and IT service tools, so a change request can trigger provisioning, validation, and ticketing in one flow. Reusable components help teams standardise common jobs, such as site turn-up or service changes, instead of rebuilding them for each vendor.

The product rewards teams that design processes first. A team without clear change workflows may find the canvas powerful but directionless. Pricing is quote-based and aimed at mid-market and enterprise buyers. For hybrid and multi-cloud teams that want orchestration without writing everything from scratch, Itential is a leading option.

Why it made the list
  • Low-code workflows across vendors and clouds
  • Visual orchestration with reusable components
  • Strong fit for hybrid estates
Keep in mind
  • Quote-based pricing
  • Implementation needs process design, not just tool setup
Gluware logo
#7

Gluware

Great for: Large multi-vendor orchestration

Open gluware.com
Pricing starts atSee website
Free tierNo

Gluware automates configuration and policy across large, multi-vendor networks. It models device configurations, detects drift from intended state, and automates changes with audit trails. That approach helps global enterprises and service providers that manage thousands of devices from many vendors and cannot rely on manual checks. Gluware also supports network discovery and inventory, which gives automation a reliable base to work from.

Scale is also the drawback. Gluware is priced and scoped for large deployments, so a small team will find it heavy and costly. Implementation needs a clear operating model and dedicated owners. For very large estates where drift and manual change are constant risks, Gluware is worth a serious evaluation.

Why it made the list
  • Multi-vendor config modelling and drift detection
  • Automation at enterprise scale
  • Strong fit for very large estates
Keep in mind
  • Enterprise pricing and scope
  • Overkill for a small single-site network
Juniper Apstra logo
#8

Juniper Apstra

Great for: Intent-based data centre control

Open juniper.net
Pricing starts atSee website
Free tierNo

Juniper Apstra manages data centre networks from intent. Engineers define what the network should do, and Apstra designs, deploys, and continuously checks the actual state against that intent. If a device drifts or a link fails, Apstra surfaces the mismatch and helps teams correct it before users notice. It supports Juniper and other vendors in the data centre, which gives operators flexibility in hardware choice.

Apstra is not a general campus or branch automation tool, so teams should not buy it for that job. Design and intent modelling also take upfront effort, though that effort pays back in fewer outages. For data centre operators who want closed-loop assurance, Apstra is a top-tier choice.

Why it made the list
  • Intent-based data centre design and validation
  • Continuous state checks
  • Multi-vendor data centre support
Keep in mind
  • Data centre focus limits campus use
  • Pricing and design effort are enterprise level
Nautobot logo
#9

Nautobot

Great for: Open source source of truth

Open networktocode.com
Pricing starts atFree
Free tierYes

Nautobot is an open source network source of truth and automation platform built by Network to Code. It stores devices, sites, circuits, IP addresses, and cables in one structured model, then exposes that data through APIs for automation tools such as Ansible. Plugins extend it for jobs such as config compliance, golden config, and job scheduling. That open model appeals to teams that want automation driven by clean, versioned network data.

Running Nautobot well takes engineering skill for deployment, upgrades, backups, and security. A commercial supported version exists for teams that want help, but the free core still needs owners. For teams with platform engineering capacity, Nautobot gives a powerful foundation at no licence cost.

Why it made the list
  • Free open source core
  • Network source of truth with automation hooks
  • Extensible through plugins and APIs
Keep in mind
  • Self-hosting and upkeep need engineering time
  • Commercial support is a separate paid option

How we picked these

We compared official product pages, vendor documentation, and public 2026 network automation comparisons, and we kept only tools that are live, maintained, and able to automate real device or network changes. We used See website where vendors do not publish a list price, rather than repeating estimates as facts. We did not claim hands-on testing, and we weighed multi-vendor reach, config control, orchestration depth, and deployment effort.

What to check before you buy a network automation tool

Start with your biggest pain. If config drift and missing backups cause incidents, prioritise a config manager first. If slow change delivery is the problem, prioritise orchestration and workflow. If troubleshooting is slow, prioritise mapping and visibility. Buying an orchestration platform to fix a backup problem wastes money and time.

Next, test the tool on your real devices. Confirm vendor and model coverage, check how it handles failed changes and rollbacks, and test change approval with your existing ticketing process. Ask how the tool stores credentials, who can approve changes, and what audit trail it keeps. Those controls matter as much as speed, because a bad automated change spreads faster than a manual one.

Finally, plan for skills and ownership. Automation needs owners for playbooks, templates, and source-of-truth data, plus testing before production changes. Start with one low-risk use case, such as backup and compliance checks, then expand to provisioning and orchestration. Measure time saved and incidents avoided before scaling to the whole estate.

Code, low-code, or vendor console

Code-based tools such as Ansible offer the most flexibility but need scripting skill. Low-code tools such as Itential speed up workflow building but still need process design. Vendor consoles such as Catalyst Center and Apstra offer depth inside one ecosystem but less freedom outside it. Choose the approach your team can actually staff and maintain.

Safety rules for automation

Always test changes in a lab or on a small device group first, and keep a tested rollback path. Limit blast radius with staged rollouts, and require approval for changes to core or production devices. Log every change with who made it, what changed, and why, so incidents can be traced fast.

Frequently asked questions

What is the best network automation tool?

For most teams, Red Hat Ansible Automation Platform is the strongest general pick because it covers many vendors, servers, and cloud resources with one approach. SolarWinds or ManageEngine suit teams that mainly need config backup and compliance, while Catalyst Center and Apstra suit single-ecosystem estates. The best pick follows your vendor mix and your main pain.

What is the best network automation software for a small team?

ManageEngine Network Configuration Manager offers commercial config management at a low annual price, while open source Ansible core and Nautobot offer free starting points for teams with engineering time. Start with backups and compliance, prove value on a small device group, and expand only when the workflow is stable.

How do network automation platforms handle multi-vendor networks?

Code and low-code platforms use vendor modules, APIs, and templates to translate a common intent into device-specific commands. Vendor consoles may support other vendors in limited areas, but depth is usually greatest inside their own ecosystem. Test your exact models and software versions in a proof of concept before committing.

Is network automation safe for production networks?

It is safe when teams test changes, stage rollouts, keep rollbacks ready, and require approvals for high-impact changes. It is risky when teams push untested playbooks to core devices without limits or audit trails. Start with read-only discovery and backups, then move to controlled changes on low-risk devices.

What is the difference between network automation and network monitoring?

Monitoring watches performance, faults, and traffic, while automation changes configuration and provisions services. The two work best together, because monitoring shows where automation should act, and automation fixes or provisions what monitoring finds. Many teams buy both, but they should not be confused as the same job.

Do I need coding skills to automate a network?

Not always. Vendor consoles and low-code platforms reduce coding, while Ansible and Nautobot reward scripting and API skills. Even with low-code tools, teams need clear process design, testing discipline, and device knowledge. Budget for training and ownership, not just licences.

Sources

  1. https://www.cloudeagle.ai/blogs/network-automationt-tools
  2. https://www.redhat.com/en/technologies/management/ansible
  3. https://www.solarwinds.com/network-configuration-manager
  4. https://www.cisco.com/site/us/en/products/networking/cloud-network-management/index.html
  5. https://www.manageengine.com/network-configuration-manager/
  6. https://www.netbraintech.com
  7. https://www.itential.com
  8. https://www.gluware.com
  9. https://www.juniper.net/us/en/products/network-automation/apstra.html
  10. https://www.networktocode.com/nautobot/

See where you really rank - block by block

ProMapRanker scans Google Maps across a grid of your service area. Simple monthly plans from $19, white-label on every plan.

Start free

Keep reading